|
Mini-notebooks -- laptops that are less than one inch thick, weigh
below two kilograms and are equipped only with a build-in hard drive
-- require memory modules that are different from those used in
regular notebook PCs. The PC2-4300/DDR2-533 Micro-DIMM is made with
the newest 32M*16 technology built on the mini-notebook PCB measuring
5.4-by-3 centimeters. The 32M*16 configuration makes computing even
more powerful for a PCB with a size 40 to 50 percent smaller than
that of a regular notebook PC memory module.
The module's quality, stability and compatibility, made possible
by the high-end 214-pin, PC2-4300/DDR2-533 PCB and FBGA packaging
technology. While high-speed-transfer is the target of DDRII technology,
in addition to following the JEDEC specifications, TwinMOS Technologies
has designed the DDRII-533 Micro-DIMM for Intel's Sonoma platform
in accordance with the 4-bit Prefetch architecture of DDRII specification
in order to burst transfer bandwidth to 5.3GB/sec. Secondly, TwinMOS
Technologies has extensively reduced the power consumption of the
product to 1.8V to lower the overall power consumption of notebook
PCs and thereby extend the battery life. Thirdly, the ODT (On Die
Termination) technology can reduce noise interference to enhance
data accuracy by maintaining the waveform of signals. The OCD (Off
Chip Driver) technology can improve the integrity of data transfer
signals. Together with TwinMOS ISO9001/ISO14001-accredited processes,
the DDRII-533 Micro-DIMM from TwinMOS Technologies is both performance-
and quality-assured. If you are in the front trend of using a sub-notebook
PC or a mini-notebook PC, TwinMOS Micro-DIMM is no doubt your best
choice to equip for it.
As TwinMOS Technologies has been the major DRAM module supplier
of world-leading system manufacturers, all DDRII modules from TwinMOS
Technologies have been mass-produced with lead-free processes as
a response to the global lead-free process campaign. TwinMOS Technologies
also requests PCB, die and soldering material suppliers to follow
the standards and requirements of Europe, the USA, Japan and China.
About TwinMOS
The goal of TwinMOS Technologies, founded in 1998, is "Value
Built on Professionalism." TwinMOS strives for sustained growth
and product diversification. It focuses on research and development,
design and distribution of memory modules, flash memory cards and
communications products, and regards itself as an IT firm that integrates
production, technologies, sales channels and management into all
its operations. Memory modules include DDR DIMM/SO-DIMM, RIMM, SDR
DIMM/SO-DIMM and SIMM. Flash memory products include CompactFlash
card, SmartMedia card, MultiMedia card, Secure Digital card, Mobile
Disk, Mobile Music Disk and Card reader/writer. Communications products
include the Access Point (pure AP, AP router, outdoor AP) and NIC
(mini-PCI, pure PCI, USB Sticker, Card box, PCMCIA, CF card) to
support Wi-Fi services. The company also provides total solutions
for its clients.
TwinMOS is headquartered in Hukou, Hsinchu, where the company also
has a manufacturing facility. It has offices located worldwide,
including Taipei, Japan, South Korea, Singapore, Hong Kong, Dubai,
Western U.S., the Netherlands and Germany, allowing for a seamless
distribution channel across the globe, and facilitating customer
service and technical support in local markets. The company in 2002
obtained an ISO9001:2000 certificate, which acknowledged the company's
manufacturing capabilities and operational management. For further
information, please visit the company website www.twinmos.com
TwinMOS Technologies Inc.
President of Business Group : Mr. Alan Pan
Contact Person: Mr. Johnson Chiang
Tel: +886-2-2696-3939
|
Quick
Search
