Quick Search
For Buyers
For Suppliers
About Us

 

 

 

 

 

Taiwan Technology - A search engine for ICT industry
A search engine for ICT industry http://www.taiwan-technology.com

Searching suppliers and products:

 

Product News

 
 
AIntelligent IP Layer 3 Gigabit/Fast Ethernet Switch
   



Sept. 13, 2001

WGS3-2620

The WGS3-2620 is a 26-port, IP-based Layer 3 Ethernet Switch with 24-port 10/100Mbps and 2-port 1000Mbps copper interface.


The two RJ-45 copper ports support 1000Mbps auto-MDI detection that can direct connect to any Gigabit Ethernet Servers, Switches, L3 backbone with a straight Category 5/5e, 8-wire UTP cable. 24-port 10/100Mbps for L2/L3 network connection.

The wire-speed switch engine provides up to 8.53Gbps switch fabric for L2 and L3 IP routing capability. Up to 256 IP subnet / L2 tagged VLAN are also available to segment the IP or MAC-based networks. IEEE802.1D Spanning Tree, bridging, Port mirroring and IEEE802.3ad port-trunk also support for optimal LAN connection and diagnose. IGMP snooping, filtering, dual priority helps to build a multimedia networks like video-conference etc.

Designed to offer the guaranteed IP Layer 3 routing, the WGS3-2620 empower the performance of pure IP-based network easier then ever..

Product Positioning:

SME IP Layer 3 Routing Switch:

With the non-blocking L2 back plane, L3 wire-speed forwarding, to build a high performance IP-based switched network is as easy as install a Layer 2 switch. Up to 256 VLAN easily build up the required IP network as network grows. Web, Telnet and console management plus RMON and port mirroring ease the management effort.

Key Features

  • 2-port 1000Mbps, 24-port 10/100Mbps Ethernet Switch

  • Complies with IEEE802.3, 10Base-T, IEEE802.3u, 100Base-TX and IEEE802.3ab, 1000Base-T standards

  • IEEE802.3x, full-duplex flow control compliant; back-pressure half-duplex flow control

  • IEEE802.1p, dual priority; IEEE802.1Q, VLAN Tagging; IEEE802.1D Bridging compliant

  • 32K MAC address table auto-ageing / 64K IP address at most

  • IPv4 Layer 3 routing, supporting RIP-1/2, OSPF (Open Shortest Path Fist), DVMRP (Distance-Vector Multicast Routing Protocol)

  • 8.53G non-blocking, Store and Forward switching architecture

  • RS-232 console interface for console program managements, Web / Telnet Support

  • IEEE802.3ad link aggregation, port-based Trunking support increase the bandwidth between switches (2/4/8-port in one trunk)

  • 256 port-based VLANs eliminate the broadcast-packet, increase the LAN security for different segments

  • IGMP multicast snooping and filtering

  • Port mirroring for port traffic diagnose with snniffer programs RMON group 1, 2, 3, 9 support

  • 19", 1U height rack mounting

  • 100~240VAC, 50~60Hz universal Power input FCC, CE class A compliant

Specifications

HARDWARE SPECIFICATIONS
Product IP Layer 3 10/100/1000Mbps Routing Switch
Model WGS3-2620
Ports 24-port 10/100Base-TX, RJ-45 Interface
2-port 1000Base-T RJ-45 Interface
Speed per port Port 1~24: 10/100Mbps, Auto-negotiation, Auto-MDI
Port 25, 26: 1000Mbps, Auto-negotiation, Auto-MDI
LED Indicators Port 1 ~24: Two per port; Link, Mode (Modes include FDX, ACT, Speed)
Port 25, 26: Two per port; Link FDX
Rack Mount 1.U, 19" Rack mount
Dimensions 430 mm x 334 mm x 44 mm (W x D x H)
SWITCHING SPECIFICATIONS
Architecture High Performance Store & Forward Switching Architecture
Memory 4MB
Switching fabric 8.53Gbps
MAC address Table Layer 2: 32K MAC-entry
Layer 3:64K IP- entry
Forwarding/filtering rate Layer 2 wired speed forwarding
Layer 3 wired speed forwarding
Error Checking Runt & CRC on all network packets
Media Type RJ-45 STP, MDI Auto-detect
Network Management IEEE802.1D Spanning Tree Protocol
IEEE802.1Q VLAN, up to 256 VLANs
IEEE802.1p dual Priority
IEEE802.1ad Link Aggregation
IEEE802.3x Flow control
RFC 1757 RMON, Group 1, 2, 3, 9
RFC 2236 IGMP (Internet Group Management Protocol)
SNMP MIB II, RFC 1213, RFC 1516
Port Mirroring,
Static MAC, Static IP, MAC filtering, IP filtering
Environment Specification
Cabling 100Mbps: Category 5 UTP, 4-wire
1000Mbps: Category 5/5e or above, 8-wire
Protocol Compatibility Layer 2: Transparent to higher layer protocols
Layer 3: IP RIP-1, RIP-2 OSPF, DVMRP
Power Consumption 100 watts maximum/ 340 BTU per hour
AC Power 100~240V AC, 50/60Hz auto-sensing
Temperature 0~40 degree C operating
Humidity 10~90% non-condensing
Emission FCC Class A, CE mark

Ordering Information
WGS3-2620 IP Layer 3 Gigabit/Fast Ethernet Routing Switch (26 RJ-45, 24-10/100, 2-1000Mbps)

PA-0426-1
Planet reserves the right to change specifications without prior notice. All brand names and trademarks are property of their respective owners. Copyright 2001 PLANET Technology Corp. All rights reserved!


Copyright © Hannover Pacific Corporation. All rights reserved.